MULTIEUSCAN NEEDING CUSTOM PROXI SETTINGS

[Pintobobster]

Good Afternoon All,
I have spoke with many who have mentioned and heard that Yani would be the best and most knowledgeable to help me if this can be corrected,
Needing some help in the registered MULTIEUSCAN custom proxi setup, I have installed a 2018 Fiat 500 TFT dash cluster speedometer into my 2012 Fiat 500 Sport. (See attached pictures) I have corrected the flashing milage, and set the byte 65 to the setting of 20 for the sport image on screen.
Everything works, except I lost some of my speedometer on screen menus settings,
I lost DRL on/off, time adjust, Trip counter, and a few others,
Is there anyone here that knows of a link or how to correct the settings in the MULTIEUSCAN for the CUSTOM PROXI BYTE numeral adjustments? I do have pretty much everything else corrected except these issues. I can upload a picture of my existing Custom PROXI settings if this would be of help.
Thank You for any help and your time.
Robert.

[chrener]

It it is because that settings are in radio...
DRL Menu is on Byte 109, value 10
Time can also set in uconnect or via MES in CAN monitor...