FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Multiecuscan usage help and guides
ishipuri
Posts: 2
Joined: 10 Jan 2023, 12:52

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by ishipuri »

hello
This is what I posted yesterday
Red/yellow/blue cables supplied with the interface
No... my yellow cable to the item of the airbag
I was able to access
It's supposed to be red, right?
My problem is the airbag warning light
So I solved it for the time being・・・

OK  sorry for bothering you
acgiannopo
Posts: 5
Joined: 17 Jan 2023, 21:37

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by acgiannopo »

Hey guys. I've bought an ELM 327 v1.5 usb dongle from Aliexpress to use it with MultiEcuScan v5.0. The only interface that works with engine ECU is K-line, nothing more. Haven't yet opened it to check if it is trully a 1.5 version. I've tried to test other interfaces and kept responding timeout. Any ideas?
wes93
Posts: 1
Joined: 23 Apr 2023, 20:02

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by wes93 »

Hello to everyone, i hope someone could help me :-D
I have bought a chinese OBD ELM327 adapter but when i try to do some tests with MES i have this log:
First Test

Code: Select all

COMMAND: ATZ
RESPONSE: AT?Z?>
COMMAND: ATI
RESPONSE: ATI?>
COMMAND: ATE0
RESPONSE: AT?E0>
COMMAND: ATL0
RESPONSE: AT?L0>
COMMAND: ATH0
RESPONSE: AT?H0>
COMMAND: ATSPC
RESPONSE: AT?S?C>
COMMAND: ATS0
RESPONSE: AT?S0>
COMMAND: ATCAF0
RESPONSE: AT?CAF0>
COMMAND: ATCFC0
RESPONSE: AT?CFC0>
COMMAND: ATCRA 7B0
RESPONSE: ATCR?A 7B0>
COMMAND: ATSH 7B0
RESPONSE: ATSH? 7B0>
COMMAND: ATAT1
RESPONSE: AT?T?1>
COMMAND: ATST41
RESPONSE: AT?ST41>
COMMAND: ATBI
RESPONSE: ATBI?>
WARNING: This interface is not compatible with ELM 327 1.3! Will not connect to any CAN module.
Second Test

Code: Select all

COMMAND: ATZ
RESPONSE: AT??>
COMMAND: ATI
RESPONSE: ATI?>
COMMAND: ATE0
Timeout operazione.
The adapter type is this:
https://it.aliexpress.com/item/1005004095493028.html?spm=a2g0o.order_list.order_list_main.71.23cb3696fUSUHI&gatewayAdapt=glo2ita
I have also tested the adapter with ELM327 Identifier, this is the log:

Code: Select all

ELM327 Identifier 1.16.19
Data scansione=2023-04-23 20:13:26
Nome dispositivo=OBDII
Versione dispositivo (dichiarata)=ELM327 v2.1
Comando	Versione	Risultato	RAW
AT@1	1.0	true	AT@1\rOBDII to RS232 Interpreter\r\r>	
ATSPA6	1.0	true	ATSPA6\rOK\r\r>	
ATTPA6	1.0	true	ATTPA6\rOK\r\r>	
ATTP6	1.0	true	ATTP6\rOK\r\r>	
ATSP00	1.3	true	ATSP00\rOK\r\r>	
ATSP6	1.0	true	ATSP6\rOK\r\r>	
ATAL	1.0	true	ATAL\rOK\r\r>	
ATNL	1.0	true	ATNL\rOK\r\r>	
ATAMC	2.0	true	ATAMC\rOK\r\r>	
ATAMT20	2.0	true	ATAMT20\rOK\r\r>	
ATRA70	1.3	true	ATRA70\rOK\r\r>	
ATSR70	1.2	true	ATSR70\rOK\r\r>	
ATAR	1.2	true	ATAR\rOK\r\r>	
ATAT0	1.2	true	ATAT0\rOK\r\r>	
ATAT2	1.2	true	ATAT2\rOK\r\r>	
ATAT1	1.2	true	ATAT1\rOK\r\r>	
ATBD	1.0	true	ATBD\r00 00 00 00 00 00 00 00 00 00 00 00 00 \r\r>	
ATBRT0F	1.2	true	ATBRT0F\rOK\r\r>	
ATC0	2.3	false	ATC0\r?\r\r>	
ATC1	2.3	false	ATC1\r?\r\r>	
ATCAF0	1.0	true	ATCAF0\rOK\r\r>	
ATCAF1	1.0	true	ATCAF1\rOK\r\r>	
ATCEA04	1.4	true	ATCEA04\rOK\r\r>	
ATCERF1	2.2	true	ATCERF1\rOK\r\r>	
ATCEA	1.4	true	ATCEA\rOK\r\r>	
ATCF00000111	1.0	true	ATCF00000111\rOK\r\r>	
ATCF111	1.0	true	ATCF111\rOK\r\r>	
ATCFC0	1.0	true	ATCFC0\rOK\r\r>	
ATCFC1	1.0	true	ATCFC1\rOK\r\r>	
ATCM00000111	1.0	true	ATCM00000111\rOK\r\r>	
ATCM111	1.0	true	ATCM111\rOK\r\r>	
ATCP18	1.0	true	ATCP18\rOK\r\r>	
ATCRA7C0	1.3	true	ATCRA7C0\rOK\r\r>	
ATCRA000007C0	1.3	true	ATCRA000007C0\rOK\r\r>	
ATCRA	1.4b	true	NO DATA\r\r>	
ATCRA	1.4b	true	ATCRA\rOK\r\r>	
ATCS	1.0	true	ATCS\rR:00 \r\r>	
ATCS	1.0	true	ATCS\rR:00 \r\r>	
ATCSM0	1.4b	true	ATCSM0\rOK\r\r>	
ATCSM0	1.4b	true	ATCSM0\rOK\r\r>	
ATCSM1	1.4b	true	ATCSM1\rOK\r\r>	
ATCSM1	1.4b	true	ATCSM1\rOK\r\r>	
ATCTM5	2.1	true	ATCTM5\rOK\r\r>	
ATCTM1	2.1	true	ATCTM1\rOK\r\r>	
ATCV0000	1.4	true	ATCV0000\rOK\r\r>	
ATD1	1.3	true	ATD1\rOK\r\r>	
ATD0	1.3	true	ATD0\rOK\r\r>	
ATDP	1.0	true	ATDP\rAUTO, \r\r>	
ATDPN	1.0	true	ATDPN\rA5\r\r>	
ATE0	1.0	true	ATE0\rOK\r\r>	
ATE1	1.0	true	OK\r\r>	
ATFCSD001122	1.1	true	ATFCSD001122\rOK\r\r>	
ATFCSH000007B0	1.1	true	ATFCSH000007B0\rOK\r\r>	
ATFCSH7B0	1.1	true	ATFCSH7B0\rOK\r\r>	
ATFCSM1	1.1	true	ATFCSM1\rOK\r\r>	
ATFCSM2	1.1	true	ATFCSM2\rOK\r\r>	
ATFCSM8	2.3	false	ATFCSM8\r?\r\r>	
ATFCSM9	2.3	false	ATFCSM9\r?\r\r>	
ATFCSMA	2.3	false	ATFCSMA\r?\r\r>	
ATFCSM0	1.1	true	ATFCSM0\rOK\r\r>	
ATFE	1.3a	true	ATFE\rOK\r\r>	
ATFT10	2.3	false	ATFT10\r?\r\r>	
ATFT	2.3	false	ATFT\r?\r\r>	
ATH0	1.0	true	ATH0\rOK\r\r>	
ATH1	1.0	true	ATH1\rOK\r\r>	
ATI	1.0	true	ATI\rELM327 v2.1\r\r>	
ATIA	2.3	false	ATIA\rELM327 v2.1\r\r>	
ATIB10	1.0	true	ATIB10\rKBusBaud=10400 OK\r\r>	
ATIB12	2.2	true	ATIB12\rKBusBaud=10400 OK\r\r>	
ATIB15	2.2	true	ATIB15\rKBusBaud=10400 OK\r\r>	
ATIB48	1.4	true	ATIB48\rKBusBaud=4800 OK\r\r>	
ATIB96	1.0	true	ATIB96\rKBusBaud=10400 OK\r\r>	
ATIFRS	1.2	true	ATIFRS\rOK\r\r>	
ATIFRH	1.2	true	ATIFRH\rOK\r\r>	
ATIFR0	1.2	true	ATIFR0\rOK\r\r>	
ATIFR2	1.2	true	ATIFR2\rOK\r\r>	
ATIFR1	1.2	true	ATIFR1\rOK\r\r>	
ATIFR6	2.2	true	ATIFR6\rOK\r\r>	
ATIFR5	2.2	true	ATIFR5\rOK\r\r>	
ATIFR4	2.2	true	ATIFR4\rOK\r\r>	
ATIGN	1.4	true	ATIGN\rON\r\r>	
ATIIA7A	1.2	true	ATIIA7A\rOK\r\r>	
ATJS	1.3	true	ATJS\rOK\r\r>	
ATJE	1.3	true	ATJE\rOK\r\r>	
ATJHF0	1.4b	true	ATJHF0\rOK\r\r>	
ATJHF1	1.4b	true	ATJHF1\rOK\r\r>	
ATJTM5	1.4b	true	ATJTM5\rOK\r\r>	
ATJTM1	1.4b	true	ATJTM1\rOK\r\r>	
ATKW	1.3	true	ATKW\r1:-- 2:-->	
ATKW0	1.2	true	ATKW0\r1:-- 2:-->	
ATKW1	1.2	true	ATKW1\r1:-- 2:-->	
ATL0	1.0	true	ATL0\rOK\r\r>	
ATL1	1.0	true	ATL1\rOK\r\n\r\n>	
ATM1	1.0	true	ATM1\r\nOK\r\n\r\n>	
ATM0	1.0	true	ATM0\r\nOK\r\n\r\n>	
ATPPFFON	1.1	true	ATPPFFON\r\nOK\r\n\r\n>	
ATPPFFOFF	1.1	true	ATPPFFOFF\r\nOK\r\n\r\n>	
ATR0	1.0	true	ATR0\r\nOK\r\n\r\n>	
ATR1	1.0	true	ATR1\r\nOK\r\n\r\n>	
ATRV	1.0	true	ATRV\r\n11.6V\r\n\r\n>	
ATS0	1.3	true	ATS0\r\nOK\r\n\r\n>	
ATS1	1.3	true	ATS1\r\nOK\r\n\r\n>	
ATSDFF	1.4	true	ATSDFF\r\nOK\r\n\r\n>	
ATRD	1.4	true	ATRD\r\nFF\r\n\r\n>	
ATSH000007E0	2.0	true	ATSH000007E0\r\nOK\r\n\r\n>	
ATSHA848F1	1.0	true	ATSHA848F1\r\nOK\r\n\r\n>	
ATSH7B0	1.0	true	ATSH7B0\r\nOK\r\n\r\n>	
ATST32	1.0	true	ATST32\r\nOK\r\n\r\n>	
ATSWFF	1.0	true	ATSWFF\r\nOK\r\n\r\n>	
ATTAF9	1.4	true	ATTAF9\r\nOK\r\n\r\n>	
ATV1	1.3	true	ATV1\r\nOK\r\n\r\n>	
ATV0	1.3	true	ATV0\r\nOK\r\n\r\n>	
ATWMC133F13E	1.0	true	ATWMC133F13E\r\nOK\r\n\r\n>	
ATPC	1.0	true	ATPC\r\nOK\r\n\r\n>	
ATWS	1.0	true	ATWS\r\n\r\rELM327 v2.1\r\n\r\n\r\n>	
ATD	1.0	true	ATD\r\nOK\r\r>	
ATZ	1.0	true	ATZ\r\r\rELM327 v2.1\r\r>	
The adapter works well with AlfaOBD.
Best Regards
Stefano
Artemiop
Posts: 2
Joined: 04 May 2023, 12:07

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Artemiop »

Hello
I share this link in case you need it.

https://es.aliexpress.com/item/1005004443781867.html?spm=a2g0o.order_list.order_list_main.10.74a8194d4wMkBS&gatewayAdapt=glo2esp

I bought this OBDII interface, and it works correctly for me, there are no changes to make it work.

It only cost me €18, I tried it on my Fiat Grande Punto 1.2, and it read the control units without problems.

The first thing I did was read which switchboards it had, and then I was accessing all of them without any problem.

In the attached image, highlighted in green, you can see the control units that I have, for the body computer you have to use the yellow adapter.
kimme1024
Posts: 7
Joined: 09 Jul 2020, 11:42

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by kimme1024 »

Artemiop wrote: 04 May 2023, 12:23 Hello
I share this link in case you need it.

https://es.aliexpress.com/item/1005004443781867.html?spm=a2g0o.order_list.order_list_main.10.74a8194d4wMkBS&gatewayAdapt=glo2esp

I bought this OBDII interface, and it works correctly for me, there are no changes to make it work.

It only cost me €18, I tried it on my Fiat Grande Punto 1.2, and it read the control units without problems.

The first thing I did was read which switchboards it had, and then I was accessing all of them without any problem.

In the attached image, highlighted in green, you can see the control units that I have, for the body computer you have to use the yellow adapter.
Hi,

I just bought this cable as you suggested, however when connecting to the service module, I'm getting a Can Bus Error. I've tried a couple of extra settings in MES but then I'm getting a timeout so I guess the settings are ok. Could you share your settings/drivers?
Thanks!

Kim
Edd1e
Posts: 1
Joined: 22 Jun 2023, 17:23

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Edd1e »

Is this issue also at the ELM 327 WiFi OBD Adapter?

Thanks in advance!
cocofredo
Posts: 1
Joined: 02 Aug 2023, 17:14

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by cocofredo »

Hi, had a problem with my elm on a Fiat panda 1,1 8V MY2006
CAN problem when i tried dashboard connect or other modules apart the engine
I removed the 120 ohm resistor on my PCB and it works like a charm now .

Image
ytrufchev
Posts: 1
Joined: 25 Aug 2023, 09:34

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by ytrufchev »

welton wrote: 29 Aug 2021, 17:11 I have viecar Bluetooth 4.0 OBD2 protocol 1.5.
I need remove resistor 120 ohm in position image atached and jumper betwen pins 1,3,7,8 and 9,11, 12, dont make jumper in pins 1 and 9.

My car is Siena 1.0 year 2014 Brazil.
Instrument Panel Continental and engine module G4F.

I have free access from ALL modules, after modification in OBD with multiecuscan and AlfaOBD. :lol:
For Proxy aligment i select Strada 1.4 in multiecuscan, all rigth in my car.

Follow the link in Aliexpress, delivery in 13 days to Brazil.

R$ 44,74 25%de desconto | Viecar-leitor de código obd2, diagnóstico via bluetooth 4.0, elm327, ios, android, pc elm 327 v1.5, interface de diagnóstico

OBD Viecar Link
https://a.aliexpress.com/_msVSbeT

Image viecar resistor 120 ohm
https://ibb.co/d74xQXJ

Image Need Jumper
https://ibb.co/TryJP6D

Good Luck for ALL.
Hi I just got the same ELM327 by Viecar, can you expaing about the jumpers, I can't understand it. Thanlk you.
mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mattydr67 »

Forget about jumpers. Use adapters especially if you wanna use Proxy Alignament.
Jumper just connect together some pins to make the interface comunicate with controlers on other pins the 7 (k-lin) or 6-14(CAN BUS)
The best ways is to use adpaters or as me an all-in-one adpater that let you manually multiplexing without changing the adpater by hand.
Read here: http://forum.multiecuscan.net/viewtopic.php?f=5&t=9532
Good luck
Infexis
Posts: 1
Joined: 12 Oct 2023, 12:38

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Infexis »

Hello, I have just bought ELM327 and new to Multiecuscan so I have a few questions.

First of all, my elm327 doesn't look the same as the others I've seen here on the forum, so I wonder which resistor should I remove.

Some other questions, why is the resistor being removed, is it to access can-modules? One other question is the ELM327 usable without the adapter cables & removing resistor. Because I got some errors trying connecting such as "WARNING: This interface is not compatible with ELM 327 1.3! Will not connect to any CAN module." and also problems when testing the connection in settings.

https://ibb.co/kyhRwct
https://ibb.co/bWPt2mF
https://ibb.co/Db0BHRC

All help and answers are appreicated since I'm all noob to this.

Thanks in advance.
Post Reply