Fiat 500x PROXI Alignment Error

[HUSOO]

Hello,

I have a fiat 500x 1.4l multiair 2015 with halogen headlights, i bought the xenon headlights and installed them, and as in a previous discussion on the forum, the guy stated that a PROXI alignment is needed to turn on the xenon and the shutter to get it working. i did so and i activated the xenon headlights which require PROXI, my ELM327 i tested in settings and it says it is supported and can connect to all CAN modules. i went ahead and changed the values from NOT PRESENT to PRESENT and did a proxy allignment, all went well untill a message popped and said something like connect adapter 5/blue, and when i pressed Y it basically failed everything after that (including 6/grey popup), the process is as bellow. can you please tell me if it is a bug or a faulty ELM connection, i had all my modules working not i have (4/11) modules working!! steering failure popped on the dash and driving mode selector is disabled. help me please. thanks.

Reading CAN configuration data ...
CAN CONFIGURATION DATA:
4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 07 00 00 04 00 00 00 00 02 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 0B 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
33 38 33 33 34 30 31 34 35 34 39 4F 55 54 50 55 54 2D 53 49 54 20 15 03 31 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 4F 04 20 05 10 00 00 00 02 00 00 00 00 00 00 00 D1 FA 0E 01 AC 81 07 E2 20 27 89 07 40 10 10 03 A3 1E 24 92 01 35 73 14 01 4F 03 34 00 B3 A8 02 46 03 07 00 8E 00 11 56 00 00 10 01 00 05 02 54 91 C6 02 A5 40 42 00 01 8A 12 3D 40 00 01 03 C1 00 81 44 10 00 00 49 01 81 12 53 42 00 00 00 13 AA 97 71 20 80 80 85 00
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Dashboard Node (IPC/NQS)
Radio Frequency Hub Node (RFHM)
Climate Control Node (HVAC/NCL)
Entertainment Telematic Node (ETM)
Electric Steering Node (EPS/NGE)
Brake System Node (ABS/BSM/NFR)
Steering Lock Node (NBS)
Parking Sensor Node (PAM/NSP)
Airbag Node (NAB/ORC)
(Multiecuscan 4.2)
2018-09-25 18:49:26
Fiat 500X 1.4 16V T-Jet/MultiAir
CAN Setup / PROXI Alignment Procedure (334)
--------------------------------------------------------------

Body Computer Node (BCM/NBC): EOL Ok
Engine Control Node (ECM/NCM): EOL Ok
Dashboard Node (IPC/NQS): EOL Ok
Radio Frequency Hub Node (RFHM): EOL Ok
Climate Control Node (HVAC/NCL): EOL Failed
Entertainment Telematic Node (ETM): EOL Failed
Electric Steering Node (EPS/NGE): EOL Failed
Brake System Node (ABS/BSM/NFR): EOL Failed
Steering Lock Node (NBS): EOL Failed
Parking Sensor Node (PAM/NSP): EOL Failed
Airbag Node (NAB/ORC): EOL Failed

EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Engine Control Node (ECM/NCM) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) SUCCESS!
Writing to module: Radio Frequency Hub Node (RFHM) SUCCESS!
Writing to module: Climate Control Node (HVAC/NCL) FAILED! - Timeout error
Writing to module: Entertainment Telematic Node (ETM) FAILED! - Timeout error
Writing to module: Electric Steering Node (EPS/NGE) FAILED! - Timeout error
Writing to module: Brake System Node (ABS/BSM/NFR) FAILED! - Timeout error
Writing to module: Steering Lock Node (NBS) FAILED! - Timeout error
Writing to module: Parking Sensor Node (PAM/NSP) FAILED! - Timeout error
Writing to module: Airbag Node (NAB/ORC) FAILED! - Timeout error
FAILED TO EXECUTE
Climate Control Node (HVAC/NCL) FAILED! - Timeout error

[yani]

It looks like you did not connect adapter 5 and adapter 6 when asked... It is not possible to make PROXI alignment of 500X without these adapters.

[HUSOO]

can you please elaborate what adapter 5 and 6 mean? do i have to buy a seperate cable? or modify the existing?