FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[Sardegna]

Hello everyone,

i have a Fiat Punto 1.3 multijet, i bought elm v1.5a.

When i try to connect to Mes not working.

See the immages at http://imgur.com/a/tmE5S

How resistor should I remove?

Thanks for help

[Alfaeddy]

Hello

I suspect R2 is the bridge resistor
but since you can only guess I just a picture of a page have.

It is also helpful if you set a screen of the interface test here.

Greeting Eddy

[Sardegna]

Thanks Eddie,

this is the interface http://imgur.com/SUHjgft.


I removed the R2 but nothing...

[Alfaeddy]

Hello Sardegna

For the reason, a screen of the interface test is so important
as already written several times the interface since 2015 only
rarely with MES Works

Greeting Eddy

[zhbrrjh]

Sorry for my English.
Fiat Panda 2008 dialogic (selespeed)
ELM 327 WI-FI USB
wires suitable for pin 2,4-5,6,7,9,14,16
reads transmission - gearbox, removes (delite) the error codes , but does not do service work on the clutch calibration torirovaniyu and other works , removes the error codes , but does not do service work on the clutch calibration torirovaniyu and other works.
How resistor should I remove
Thanks for help
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing
https://drive.google.com/file/d/0BxHjrm ... sp=sharing

[yonubear]

Hi all,

I am hoping you can help me out I am trying to get a elm327 working on JT850 PWM and I am having no luck I am hoping someone here may be able to help me out I am attaching photos of the PCB.





Thanks,
Yonu

[balu807]

Hello. Can somebody help me which resistor I need to destroy to connect my car's dahsboard. I need proxy alignment. Alfa Romeo 147 1,9 JTD

https://photos.google.com/share/AF1QipP ... R3U2NMU093

Thanks for the help

[us911]

A good link is www.electronic-fuchs.de
Die sprechen deutsch.

[luka78]

I just want to by on e-bay proper interface that I can use for things I explained in my other post on wrong topics. It is for Fiat bravo '08, 1.9 16V. So what to look for on ebay? If you can send me a link, it would be great. I prefer bluetooth, but if there isn't any of it USB is fine too.

So is it something this:
This interface: http://www.ebay.com/itm/Auto-V2-1-Inter ... SwKfVXD8wb

+ this A1 adapter cable:
http://www.ebay.com/itm/Diagnose-Adapte ... OSwDk5ULac~

Whit this I can access to engine, ABS, ESP, airbag modules etc...

Thanks

[albert]

Have you ever seen this elm327 1.5 PCB ?
USB communication is ok but no connection to OBD (tested on a Fiat Punto 1.3 JTD Blue&ME 2011 and with EasyOBD, with and without adapter 3 (yellow)).
No result with "Scan for Interfaces" feature in Multiecuscan settings.
Where is the resistor to cut ? (R14???)
http://s32.postimg.org/f1k370ok5/20160428_203842.jpg
http://s32.postimg.org/r0vlebu51/20160428_203913.jpg