FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

[Waltomatic]

Xiii, os caras entraram numas de falar só em alemão... fiquei de fora!

kkkkkkkkkk

[Alfaeddy]

Hallo Alfa156Sarajevo

Die Software Forscan.org hatte ich einige Beiträge weiter oben ja schon genannt.

Gruß Eddy

[Marco244]

Hallo Eddy,

also mit ForScan komme ich in die ECU meines Focus.
Dies zeigt mir allerdings eine ganze Reihe komischer FEhlercodes an.
Außerdem funktioniert die LIVE-Aufzeichnung nicht

Also gibt es definitiv keine Möglichkeit, den Bluetooth Adapter iwie zu modifizieren?

[Alfaeddy]

Hi Marco

Die Sache bei dir hat ja nichts mit dem hier beschriebenen Problem zu tun.

Das mit dem Brückenwiderstand ist ein Timing Problem mit dem die Software nicht
gut zurecht kommt.

Bei der Sache mit deinem Focus hat die von dir genutzte Software nicht die
richtigen Umrechnungsformeln um mit den Daten welches der ECU heraus gibt
etwas anfangen zu können.

Leider kann ich da nicht weiter helfen , Sorry


Gruß Eddy

[EddyDj]

Hello Eddy,
I bought this elm327 interface (v1.5) and connect it to the engine control unit, but does not connect to other control can as the body computer. My car is Alfa MiTo 1.4 16v and I also bought the adapter type A3 for multiecuscan. To connect to the CAN line in addition to connecting the A3 I have to remove the resistance? Where is it? I tried to look for it but can not find it, I am attaching pictures hoping you can give me a hand.
Thanks in advance, Eddy.

IMAG1784.jpg (793.62 KiB) Viewed 5807 times

IMAG1783.jpg (896.33 KiB) Viewed 5807 times

IMAG1788.jpg (1.09 MiB) Viewed 5807 times

[EddyDj]

Other pictures...

IMAG1795.jpg (874.14 KiB) Viewed 5807 times

IMAG1798.jpg (618.05 KiB) Viewed 5807 times

IMAG1809.jpg (718.42 KiB) Viewed 5807 times

[EddyDj]

Last picture.

IMAG1801.jpg (651.34 KiB) Viewed 5808 times

[Alfaeddy]

Hi Eddy

nice name

Finally an interface which I do not know yet
You made good pictures, only to no is the bridge resistor
visible.

Search the chip imprinted with MCP2551 or TJA1040 and even take a picture of the chip and the environment around this chip

Greetings Eddy

[EddyDj]

Hello Eddy,
also your good name
this is the photo of the chip TJA1040
and around there is another chip and there is only this resistor (?) C3. I have to remove it (C3)?

Best Regards Eddy

IMAG1811.jpg (615.57 KiB) Viewed 5807 times

IMAG1816.jpg (477.32 KiB) Viewed 5807 times

[Alfaeddy]

Hi Eddy
I'm confused


C3? no,
C is the name for a capacitor

The resistor will be only to see if you can solder the upper board
and send me a picture can.

By coincidence I've just in another forum probably the same board with the search for the bridge resistor

This user has unfortunately I still do not make better pictures


Greetings Eddy