Hi all,
I've a problem, my giulietta fail the proxi alignment with this error log:
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
6F 04 00 04 00 00 00 00 6F 04 00 04 00 00 00 00 01 00 00 00 02 00 00 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
6F 04 00 04 00 00 00 00 09 04 00 04 02 00 00 00 6F 04 00 04 00 00 00 00 09 04 00 04 02 00 00 00 09 04 00 04 00 00 00 00
30 34 31 39 31 30 30 30 34 38 39 4F 55 54 50 55 54 2D 4A 49 54 20 10 05 25 6F 04 00 04 00 00 00 00 09 04 00 04 02 00 00 00 C7 C0 51 07 8F 00 3C 11 38 00 00 16 00 07 09 9C 06 2B 03 46 00 00 02 00 3A 51 0A 7C 00 00 00 00 09 00 00 00 00 37 01 91 01 38 00 20
CURRENTLY CONFIGURED CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Receiver Radio (NRR)
Brake System Node (NFR)
Climate Control Node (NCL)
Airbag Node (NAB)
CURRENTLY AVAILABLE CAN MODULES:
Body Computer Node (NBC)
Engine Control Node (NCM)
Electric Steering Node (NGE)
Dashboard Node (NQS)
Receiver Radio (NRR)
Brake System Node (NFR)
Climate Control Node (NCL)
Airbag Node (NAB)
CAN MODULES THAT REQUIRE EOL PROGRAMMING:
Body Computer Node (NBC)
Dashboard Node (NQS)
Climate Control Node (NCL)
Airbag Node (NAB)
Convergence Telematic Node (CTM)
20/04/2014 13:22:49
CONNECTED TO:
Alfa Romeo Giulietta 2.0 MultiJet 16V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------
CURRENTLY CONFIGURED CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Receiver Radio (NRR):
Brake System Node (NFR):
Climate Control Node (NCL):
Airbag Node (NAB):
:
CURRENTLY AVAILABLE CAN MODULES::
Body Computer Node (NBC):
Engine Control Node (NCM):
Electric Steering Node (NGE):
Dashboard Node (NQS):
Receiver Radio (NRR):
Brake System Node (NFR):
Climate Control Node (NCL):
Airbag Node (NAB):
:
CAN MODULES THAT REQUIRE EOL PROGRAMMING::
Body Computer Node (NBC):
Dashboard Node (NQS):
Climate Control Node (NCL):
Airbag Node (NAB):
Convergence Telematic Node (CTM):
EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC) SUCCESS!
Writing to module: Dashboard Node (NQS) SUCCESS!
Writing to module: Climate Control Node (NCL) SUCCESS!
Writing to module: Airbag Node (NAB) SUCCESS!
0
Writing to module: Convergence Telematic Node (CTM) FAILED! - Timeout error
FAILED TO EXECUTE
Convergence Telematic Node (CTM) FAILED! - Timeout error
What is the problem?
Thanks
Giuseppe