CANtieCAR interface

[myfiat]

I have the registered version of the software.
Is it possible to buy the new CANtieCAR interface seperately?

[alfa156sarajevo]

If you would like to buy CANtieCAR interface separately you have 2 options:
- buy it from Yani and you will get CtC interface and registered (licensed) version of MES + 1 year of free updates;
or
- buy CANtieCAR interface directly from CtC company and no one can guarantee you that it will work with MES without any problems. I am not sure that it will work at all.

[myfiat]

If you would like to buy CANtieCAR interface separately you have 2 options:
- buy it from Yani and you will get CtC interface and registered (licensed) version of MES + 1 year of free updates;
or
- buy CANtieCAR interface directly from CtC company and no one can guarantee you that it will work with MES without any problems. I am not sure that it will work at all.

I already have a licensed version with life time updates

[alfa156sarajevo]

If you would like to buy CANtieCAR interface separately you have 2 options:
- buy it from Yani and you will get CtC interface and registered (licensed) version of MES + 1 year of free updates;
or
- buy CANtieCAR interface directly from CtC company and no one can guarantee you that it will work with MES without any problems. I am not sure that it will work at all.

I already have a licensed version with life time updates

So you need to pay 200€ (190€ for CTC interface +10€ for shipping costs) to Yani and you will get CTC interface and 1 year of free updates.

[fiatuno]

I am also interested in the CTC, but if the CANtieCAR is bought by YANI supports all the features and upgrades of the official product? Around because they say it only works with MES is true?


Hardware - Powerful ARM-core MCU
- Bluetooth v2.0 + EDR
- True USB-ready device: CDC, FT232B/R-emulation, FT2232C-emulation, MSD over SD Card
- SD Card: internal Flash storage with USB-MSD up to 32GB
- 3 independent ISO9141/ISO14239 K-Lines (ISO-Lines): OBDII-pins 7,8,15
- 2 multi-functional lines (MFLs): CAN - one and two-wires, K Lines, J1850, DC-DC-out (5-30V)/1W etc.
- built-in solid state relays multiplexer for OBDII-pins 1,2,3,6,13 and 9,10,11,12,14
- built-in hardware UART multiplexer
- 11 Leds: 6 - Bus Activity, 1 - USB/Bluetooth TX Activity, 1 bi-color - Power state: USB and car + USB Activity, 1 - Bluetooth Status/Activity, 2 - Status
- 2 DC-DC: 5V/500mA and programmable (5-30V)/1W
- 4 ADC Channels: Power ISO-Lines, Power MFL, High MFL, Low MFL
- Systems: Up to 32V
- Speed: ISO-Lines up to 500kbit/s; CAN up to 1Mbit/s
- Special OBDII-connector design
- Security Firmware updates
- ALL protections with Resetable fuses
- Support additional equipment for cars

Emulated well-known adapters - USB-Serial (6:CTS, 7:RXD, 8:DTR/DSR, 14:RTS, 15:TXD)
- KL-Line (7:K, 15:L)
- 2K-Line (7:K, 15:K2)
- KKL-Line (7:K, 15:L/K2)
- 3K-Line (7:K, 15:K2, 8:K3)
- OPEL 4K-Line (7:K, 8:K3, 3:K4, 12:K5)
- Multiplexed K-Line to ALL OBD-pins
- VAGCOM v409-1 (KKL-Design)
- RS485 Duplex (12:A, 13:B)
- RS485 Half-Duplex (12:A, 13:B)
-
Carsoft BMW 6.5/7.3
- Carsoft MB 7.4
- Carsoft MB 7.4 - OBDII
- Siemens Airbag 3.0
- NISSAN Consult I + Sync (10:TX, 2:RX, 7:SYNC)
- NISSAN Consult I - OBDII (12:TX, 13:RX)
- DIESEL-kit v1.0
- VOLVO 9998555
- P.A.Soft BMW Scanner v1.2.5
- P.A.Soft BMW Scanner v1.3.6
- P.A.Soft BMW Scanner v1.4.0 Demo
- P.A.Soft BMW Scanner v1.4.x
- BMW EDIABAS: STD:OBD
- BMW EDIABAS: ADS
- BMW EDIABAS: D-CAN Combo (STD:OBD K + D-CAN)
- BMW EDIABAS: D-CAN Fast (STD:OBD D-CAN)
- BMW EDIABAS: D-CAN Fxx (STD:OBD D-CAN for F-series)
- BMW EDIABAS: JBE PT-CAN (STD:OBD + JBE CAN 500k)
- BMW EDIABAS: JBE K-CAN (STD:OBD + JBE CAN 100k)
- ELM323 v2.0+
- ELM327 v1.4+
- ELM327 v1.4+ (ScanTool.net)
- DigiProg OBDII Flasher
- KWP2000 Flasher
- KWP2000 PLUS Flasher
- CMD EDC16 OBDII Flasher v1236 - K-Line
- CMD EDC16 OBDII Flasher v1244 - K-Line
- CMD EDC16 OBDII Flasher v1251 - CAN
- CMD EDC16 OBDII Flasher v1255 - K-Line
- CMD MAP3Diag
- CMD MPC5xx BDM Programmer v1251 (4/5:GND-6, 6:RST-1, 7:DI-7, 8:SCK-5, 14:IGN-2, 15:DO-8, 16:PWR-9)
- Galletto v1050/1080 EOBDII Flasher
- Galletto v1245 EOBDII Flasher
- Galletto v1250 EOBDII Flasher
- Galletto v1260 EOBDII Flasher
- VAG K+CAN Commander v1.4/v2.5/v3.6
- LICZNIK USB Dongle for v4.8a
- Lawicel CAN232 v3 (6:High, 14:Low)
- Lawicel CANUSB v1 (6:High, 14:Low)
- PonyProg2000 (4/5:GND-10, 6:IN#-6, 7:OUT#-5, 8:SCLK#-4, 14:VCC/RST-1/3, 15:RST#-2)
- EDiTH Eberspacher ISO Adapter
- OpenPort v1
- OpenPort v1.2
- OpenPort v1.3 Universal (11:Vpp/Boot)
- Multiecuscan v3.4+
- PassThru SAE J2534-1/2
- PassThru SAE J2534-1/2 - BMW up to 2008


OFFICIAL DRiVERS and UPGRADE

CANtieCAR v2.x files
Drivers for Windows 7/Vista/XP/2k3/2k/9x Version 2.08.14
CANtieCAR Configurator Version 2.2.4.8 (Passthru Driver v2.1.20)
CANtieCAR v2.x Firmware (BW:2.2.842/FW:2.2.3006)
CANtieCAR v2.x Service Flow Chart
CANtieCAR First Time Drivers Installation
CANtieCAR v2.x Passcode - 5678
CANtieCAR v2.1 CAN-Input Hardware BUG Fixing
CANtieCAR v2.0 CAN-Input Hardware BUG Fixing

[yani]

The CANtieCAR interfaces which we sell with Multiecuscan MULTIPLEXED have only the basic K-line modes and the Multiecuscan mode.
Any CANtieCAR interface can be upgraded to support the other modes by a firmware update at any time. You can purchase the additional features from the manufacturer - tiecar.net

[fiatuno]

If I buy your interface and upgrade with the latest official firmware will continue to operate normally with MES?
After the firmware upgrade is mandatory purchase the additional features?
Or you can enjoy the upgrade just to use MES?

regards,
Francesco

[alfa156sarajevo]

The CANtieCAR interfaces which we sell with Multiecuscan MULTIPLEXED have only the basic K-line modes and the Multiecuscan mode.
Any CANtieCAR interface can be upgraded to support the other modes by a firmware update at any time. You can purchase the additional features from the manufacturer - tiecar.net

Do yuo by any chance know how much that upgrade costs?

[jb3112]

Any news

[s130]

Yes any more info on this, especially if you already have a lifetime MES license can you buy just the interface from Yani and they will work together and continue to get lifetime upgrades?