As in the topic. As far as I know, certain airbag, ABS modules communicate on K-Line protocol, connected to specific OBD2 pins. K-line is ISO 9141. ELM327 seems to support ISO 9141, and certain interfaces do have connected pins on pin 7 of it's OBD connector. What is the reason for that Multiecuscan...

You need the dump of the body controller and a key programmer device, like zed-bull to prepare an id48 chip, so you can program it to.the car with multiecuscan.

English, por favor.

You probably have a fake elm, or you did not switch the ignition on.

To which module and what car did you try to connect?

For more help, you need to post more details of your interface and the whole Test results.

Do you have the logs folder setup correctly? If so, try posting some logs about the reset.

Did you experience any misbehaviour before you did the self adaptation and phonic wheel reset? Try doing the resets again. Are you using registered version of Multiecuscan? Try contacting yani, he may ask you to send the report after the resets (the big red send report button in the main menu near t...

Probably your interface is a fake elm. Resistor-related faults show the interface compatible, but can't connect to anything else than the engine ECU. You can test your interface with an ELM compatibility tester software, that will show you which versions - if any - does your interface support. https...

Probably your interface is a fake elm. Resistor-related faults show the interface compatible, but can't connect to anything else than the engine ECU. You can test your interface with an ELM compatibility tester software, that will show you which versions - if any - does your interface support. https...

Try this driver:

https://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip


Do you have a hardware COM port on your laptop?

Usually if you can connect to the engine but not other modules, than your ELM has bad termination resistor on CAN line. After removing (and even better: adding proper termination), it should work. Only if you have FTDI USB IC in it and PIC microcontroller. Cheap fake chinese clones are totally usele...