Well, I used Google Photo.

Can you see the picture here:

https://goo.gl/photos/ZH2yrZ3gvxkPN49U8

I removed the resistor (red circle in the picture) with no result.
What I have to do to use it?

Thanks!

Just to say you I removed the resistor, but I had the same problem: I can comunicate to Engine ECU only! Why? Aparty Hello Do please have a picture of the board and again a screen from Interface Test Greeting Eddy Here a picture of the board where I removed the resistor. The interface test as soon ...

Hello Aparty Your interface is the same as the ELM of Tamso Therefore you need to remove the same resistor (121) to to make your interface CAN bus capable of MES, Greeting Eddy Thanks Eddy for your support. I'm going on to remove that resistor. I'll update as soon as possibile. One info: after remo...

Hello Aparty Your interface is the same as the ELM of Tamso Therefore you need to remove the same resistor (121) to to make your interface CAN bus capable of MES, Greeting Eddy Thanks Eddy for your support. I'm going on to remove that resistor. I'll update as soon as possibile. One info: after remo...

Hello Tasmo Remove the Resistor in the red Frame and you can read the CAN Bus Protokoll of your Car Greetings Eddy IMG_0591 markiert.jpg Hello! I have a ELM327 USB with PCB like in photo. It connect only to engine ECU, not to other ECU. I see my interface is similiar to Tasmo's one (http://forum.mu...