Waltomatic wrote:I think you will only waste time...

Almost for sure!!

Because it doesn't work anymore high regulation of right one... And I'd like to see if via MES I can do something... On elearn I've seen that there's a pin on xenon headlight connector that goes on body computer. But I don't know if there's that connection without xenon from the factory... I've try ...

So, I've tried to bridge together pin 7 and 12, and the results are: 1) Alfa: nothing appens... Can't connect with xeno ecu... 2) 500: can't connect with anything!! So, the 500 won't 7 and 12 bridged together... But for my Alfa I've a doubt: Is that impossible to connect with xeno ecu because they (...

Cáspita!!! Você não disse que era do Alfa, kkkkkkk Meu conselho: esqueça a adaptação para o Alfa e compre um cabo. I've written it few pages before, I forgot to repeat it! :P And that's why I've welded some pins together before!!! :D I've to try to weld together pin 7 and 12 to wire 7, and see what...

Racing, you can include 12-7 in it, respecting the disconnection of 7 when linking with 12. I've tried that way, but it don't connect with the xeno ecu... In normal operation, just switching the wire 7 from pin 7 to pin 12, it doesn't connect... So, seeing adapter #1, where 7, 9, 12, 1 are linked t...

Racing, you can include 12-7 in it, respecting the disconnection of 7 when linking with 12. I've tried that way, but it don't connect with the xeno ecu... In normal operation, just switching the wire 7 from pin 7 to pin 12, it doesn't connect... So, seeing adapter #1, where 7, 9, 12, 1 are linked t...

hello In this ELM all possible circuits are housed in 2 switch positions, there is no need for adapters. http://forum.multiecuscan.net/viewtopic.php?f=5&t=4297&p=15111#p15111 Greeting Eddy Exactly, but it's not a "dip switch", it's a "change-over switch", as I said... Bu...

Finally it works!!!! I think that the error was the joint of pins 7, 12, 9, 1 to emulate adapter #1!! I wasn't thinking that even if I had put a switch on it, the joint had made a bridge between the pins... :P OF COURSE, as I said! :D Anyway, I've tested that the 3rd switch that change from pin 7 t...

Finally it works!!!! I think that the error was the joint of pins 7, 12, 9, 1 to emulate adapter #1!! I wasn't thinking that even if I had put a switch on it, the joint had made a bridge between the pins... :P Anyway, I've tested that the 3rd switch that change from pin 7 to pin 12 is useless on 500...

Waltomatic wrote:

Racing Man wrote:[My connections are exactly the same of this scheme...

Sorry, but this is not true... you said that don't have pin 12 wire... so, they are NOT EXACTLY THE SAME...

Redo and be happy!

Why not? the pin 12 on the right of the scheme (male obd connector) is connected on 7 wire of the circuit!!