Good an bad news! This adapter have a better cloned software and on a Fiat punto JTD is able to "connect". The problem is that if i connect torque before turn on engine on the gauge cluster all goes to zero and the diesel low level led start to blink. In addiction the engine not start! It ...

Just to enforce the murphy's law (!!!), ... KKKKKKKK, I loved it Do not get it right and today I am impatient to translate (Google), but you know that Mac Adreess may well be completely different, right? In theory, until it should be. Yes, in theory mac address should be unique for every device, bu...

Just to enforce the murphy's law (!!!), I bought another adapter from a different vendor and with different description, but I got another scanner identical to the previous with chip BK3231Q + MCP2515 + TJA1040. From the previous change the PCB color. The older was green, this red. Also this work on...

can someone help me please? i need to know which resitor needs to be cutted off, here is a link to photo gallery http://postimg.org/gallery/2dww3a37u/ Seems another adapter with chip Beken and probably remove the resistance will not solve the problems. In any case should be the R27, visible in this...

Cxem if you read the topic, on your forum, thread http://forum.cxem.net/index.php?s=3d1596e579e7fe29ec42f968a3a2f325&showtopic=144556&st=20, evony has wrote this: Здравствуйте. На моём elm327 на BK3231Q 50-я нога подключяется к линии K-line через делитель R1,R2. R1-было около 70ком.а R2 окол...

boch wrote:

blkid wrote: - Abs/vdc avary reported

typical situation while connecting to ABS/ESP module i think. i found the same problem with USB interface.

The failures reported occur simultaneously

Ok, checked on alfa 159 and, as supposed, it was not possible to connect to anything. In addition, when i try to connect with multiecuscan at the engine ecu or with torque, turn on several anomalies: - Airbag avary reported - Abs/vdc avary reported - water temperature gauge at full scale - fuel gaug...

Surely saturday i will test also with multiecuscan on the alfa 159 of my brother, but i already imagine the outcome. If on the 156 and fiat punto jtd mine doesn't work and that of my brother in law yes (it have a mini version like this: http://www.iobd2.org/wp-content/uploads/2013/10/Super_Mini_ELM3...

I used torque this weekend on 2 fiat auto. A fiat punto 1.9 jtd and an alfa 156 jtd mjet. On both car my 2 scanner was not able to connect to ecu. I tried with another scanner and on these car was able to connect, then that my scanners are bad is certain! The above cars are not in my possession, and...

I don't tested with multiecuscan. This is reported by zafron in earlier post: This is what I get when test the interface. I bought it as elm 1.5 but it seems that is 2.1! COMMAND: ATZ RESPONSE: ELM327 v2.1> COMMAND: ATI RESPONSE: ATI ELM327 v2.1> COMMAND: ATE0 RESPONSE: ATE0 OK> COMMAND: ATL0 RESPON...