Is it possible to make multiecuscan support elm327 v2.1? There are many devices that come with v2.1.

Today I tested it with multiecuscan. I couldn't connect as well. This is what I got when I tested the interface. Why it doesn't work ? COMMAND: ATZ RESPONSE: ELM327 v2.1> COMMAND: ATI RESPONSE: ATIELM327 v2.1> COMMAND: ATE0 RESPONSE: ATE0OK> COMMAND: ATL0 RESPONSE: OK> COMMAND: ATH0 RESPONSE: OK> CO...

Alfaeddy I also want to read my Electric Steering errors not only engine ones. I tried many different android apps but since I removed that resistor I can't connect with none of them. Today I will try with a laptop and multiecuscan and I hope it connects successfully. :( Could you please tell me wha...

I noticed something. Since I removed the resistor when I start torque when it is trying the different protocols the fuel arrow and the engine temperature arrow go up and down, the steering light appears on the dashboard and things like that. However it doesn't connect with none of the protocols. Any...

Hello Veskoy Oh! You're working with AlfaOBD Androit, I have not read :oops: Here, no driver is needed. Is the battery charged? Some had connection problems, it was the almost empty battery Let the engine run Greeting Eddy Yes the battery is fully charged. The problem is that before I removed the r...

Hello Veskoy Your connection problem is not the bridge resistor but probably a wrong driver. Because the ECU on your Punto is not read by CAN bus, but with KWP2000 and there is no function of the resistor R34 Charging you this driver and try again. http://www.ftdichip.com/Drivers/VCP.htm Only for B...

Hello! I recently bought a ELM327 Mini Bluetooth interface of this kind: http://www.iobd2.org/wp-content/uploads/2013/10/Super_Mini_ELM327_Interface_Bluetooth_OBD2_Scan_Tool_3509032_a.jpg The problem is that when I tried it it connected with Torque free and OBD Car Doctor, however it didn't connect ...