Hi RogerAvenger! Don't need any other switch!! Your picture is correct! You only need to remove the black cable from pin4-5 and then solder it to pin3 (airbag)! The switch must be in "3" (airbag) position!! After this mod, you can read the airbag module! 8-) Thank you very much, these chi...

Hello I told you once drawn up a plan as should be the connection. With a switch, the link should be established. Because you should not extraneous signals such as Read the Motorecu or ABS allowed to come to the airbag control unit. There are also people to easily connect from pin 3 to pin 1 + Pin7...

Hello Also, no way, you must not connect the terminals. The pin 3 must go to the board input to which also the pin 7. But beware! then the pin 7 must have unable to connect to the board The easiest way to solve a switch Greetings Eddy I'm not sure I get what you're saying, I'm sorry. I can connect ...

Hahaha Check this out! My new chineese VAGKKL cable.. Airbag is soldered to pin4-5, instead of pin3! :D ESP is soldered to pin11-12, instead of pin12-13. :D After the modification it works properly.. So first of all you should check the cable for correct pinout. 8-) VAG-409-KKL-USB-FIAT-ECU-scan.jp...