Alfaeddy wrote:Hello obk


I have not measured the idle current of the ELM
But who is not highly

Alternatively you can use a switch on the terminal pin 16 install

Greetings Eddy

Thank you Eddy for all your help.

I understood that removing R04 has no disadvantages for me. I'll connect all CAN and ECU modules without R04. I don't need to resolder R04. Am I right? I bought it from a local seller, the cheapest one in the local market. So I didn't need to buy from ebay. But sure it is a chinese fake clone. It is...

Hi Eddy.

I've removed R04. It is seen on the picture which I've added to my previous post. Is that true? Or was it the wrong one?

Now it seems it connects.

I didn't try to connect with R04. Sorry, I have no info about the original situation.

Thank you for your help.

I'm a bit impatient :) I removed R04 and connected pin 1 to 7. It worked both with MES and Torque. Automatically detected com22. But in some modules it throw out me to the main screen. Also I get "invalid iso code" warning. My car is Bravo 1.4 t-jet 2009 And I couldn't find LTFT and STFT (...

Hi everyone. This is my new clone elm327 bluetooth with standart shape; There is an R04 (121) which resists between pins 3 to 4 from right; with flash; http://imageshack.us/a/img145/852/cam00026k.jpg without flash; http://imageshack.us/a/img208/1862/cam00030.jpg rear view; http://imageshack.us/a/img...

Hi. I need to use ELM(unmodified), ELM1 and ELM9 connections. If I solder pin 7 to 1 and 9, does it works for ELM(unmodified) functions too? Or pin 7 connection must be cut when switched to pin 1 or 9 ? I can make a switch(jumper) for ELM1 and ELM9 positions. Is it necessary to use a switch which cu...