:D Utter relief found fault. Pin 1 on OBD socket in car was not properly in place. Removed OBD socket from dash and secured wire back into connector. Can now see and read the ABS with the KL, Gendan Elm and the OBDkey connectors. Was Bosch ABS 8. Thanks for your help. Sent you the report as well. :D

Checked the green connector and the serial cable off the Gendan Elm unit. All OK. My concern is that the usb OBDkey saw something that the Elm and KL connectors didn't, with or without the green connector. The car has done less than 10,000 miles and hasn't been abused. The Haynes manaual says that t...

Sent off reports. Tried connecting through 500 1.2 ABS. This doesn't work either. Causes clock and trip meter to clear. Causes U1602 can error. Can't actually connect to the ABS module, only see it when scanning. Sees ABS with OBDkey and with OBDkey/Green connector. Can't connect. I have attached a ...

Panda 1.2 8 valve 2009, Can see an ABS unit with OBDkey but doesn't recognise it. ISO number all 0's. ELM and KL interface doesn't see the ABS at all. Other ECU's seem OK and are seen and can be read etc. Vehicle lists says KL, ELM and OBDkey should all see the ABS and read it with adapter lead. Bou...