ABS you can try it with you tool ELM Just open it up and solder the pin 7 with pin4 together You'll see that you can connect in it Just for Airbag you need another tool a KKL interface but for the all others the ELM it is good enough Good luck So I connect pins 7 and 4 - I read Airbag and I am stil...

No mate in your tool you can solder toghether pin 1, 7 and 12 But as I told you Airbags it isn't covered by the ELM327 You can use a scwitch and a VAG kkl for the k-line controler and keep your ELM just for CAN controlers This if you dosen't want to have separate adaptors Good luck Ah, I got it now...

That's good ABS it is on PIN 1 you can solder a wire from PIN 7 to Pin 1 and you'll be able to conect to ABS or use the adaptor1 For Airbag on K-line which is on pin 3 even you solder a wire between pin 7 to pin 3 you'll not be able to connect on it becasue the ELM327 dosen't suport Airbags on K-li...

Can you connect into the CAN controlers? As I see in your pics your tool it is 1.5 The chinese made this version 1.5 which can be version 1.3, 1.4 or in the bad case 1.2 Version 1.2 it is not support by the FES So in this case you have to go in other CAN car and try to connect using a softwear for ...

I removed the R04 resistor and it now works like a charm

Hi guys I think I have the problem described here, unfortunately I am not very good at electronics but a resistor or two to unsolder would be no problem :) I recently bought this: http://myhomebills.info/P3075268.jpeg http://myhomebills.info/P3075266.jpeg If anyone should have a clue I would be grea...