to be sure, I checked now the oil degradation.
100% of yesterday, today marks 99.66%.
so now I'm sure the meter is operating in reverse.
part by 100% and drops to 0% when the oil is totally degraded.
If you do not agree with me let me know.
Thank you.

Hello. because of opposing values​​? how do I know when it is right? I have to count back? I know that at 0%, the oil is completely degraded. and when the oil is 100% good? Thank you. Yes, maybe Yani will fix it. BAS so does the degradation of oil from 0% to 100% when it reaches 100% means that you...

Hello.
because of opposing values​​?
how do I know when it is right?
I have to count back?
I know that at 0%, the oil is completely degraded.
and when the oil is 100% good?
Thank you.

Hello. ok. I did as you wrote to me. "" engine ECU-> F10-> Oil Change " I hope that I have solved the problem of oil degradation. in the "oil degradation level" marks 100% on software multiecuscan. before: "engine ECU-> F10-> Oil Change" "oil degradation level...

Hello. thank you for your response. but I must also reset the counter on the regeneration of the "filter" particle "? because the calculation of the unit of Fiat 500, the result is: after a number of regenerations is necessary to change the oil. does not work like that? so you need to...

Hello. I have a problem with my fiat 500 1.3 mjt dpf. I replaced the oil and did the "service interval reset" with the hardware (1.4a elm modified with dirty solution) and adapter cable yellow. After about 200km flashing light oil (and writes the following message: to change engine oil). W...