Hey have you tested newest drivers for FTDI chip (virtual COM port drivers.). What I have understood that it's de facto standard chip and driver on these VagCom KKL USB interfaces. I just read some "latency too high errors" reported on www.alfabbs.fi and in that case more on date drivers s...

I forgot to mention that I haven't tested it with my Bravo 1.2/80 ABS ECU since as far as I know It doesn't have such :) My connection to my Airbag and Engine ECUs are working good as far as I have tested. Did you try to put lower bps rate, lets say 4800 bps? And lower that "latency" time ...

what do you mean for "search for problems"? do you want to search trought the list of all trouble codes? Hi, Scanning various things to see if there's any problems. I see on Alfadiag you can run various test which seem to check for problems i.e run tests on injector 1/2/3/4. Or is this th...

Is your laptop (netbook) 2 core with 800MHz each? It may be that since as FES documentation states you should have ~1.5GHz CPU on computer..

FES 2.7.2 works on my Acer ONE gen.1 with Atom N270@1.6Ghz and WinXP

Thx. Those A1, A2 markings misleaded me first.

Anyone? So if I get the VAG COM KKL 409.1 interface cable (No CAN-BUS connections att all?) and order license to F.E.S I should connect and reset Engine, ABS and Airbag ECUs on my Bendolino? If anyone have answers my above question I would be glad to hear them too. :) Ps. Am I correct path of unders...

This is a bit old post now, but I'll answer to this anyway. First you need an "usb-serial" drivers installed on your computer. They should be in the CD delivered with elm-327 cable/interface. 2nd many elm-327 interfaces needs +12Vdc input from car to get all function to work, that's becous...

Hello I have this question, first I need to say that I have read the http://www.multiecuscan.net/SupportedVehiclesList.aspx site. What I don't get is the reasons and the differences on needed interfaces. SOLVED. What are those red marked cables A1 A2 etc. real physical cables? if so where I can get ...