If you have correctly dashboard this option will unavailable, because software in body doesn't support this. Cars after 2009 has improved this functionality in software (Cornering ON/OFF). I have a few friends, who's bravo are manufactured in 2007 and 2008 and the service could activate the "c...

I've done the proxy alignment on my Bravo'08. NEW CAN MODULES:: Info-Telematikus/Convergence csomópont (NIT/NCV): : REMOVED CAN MODULES:: Rádióvevõ/Rádiós navigaátor térképekkel (NRR/RMN): : CAN MODULES THAT REQUIRE EOL PROGRAMMING:: Body Computer (Karosszéria v.e. - NBC): Mûszerfal (NQS): Légkondic...

I have downloaded and installed Framework 3.5.1, but FES 2.8 still not works. :( FES 2.7.2 had worked properly. Any idea? thanks What is your operationg system? Do you have other .NET Frameworks installed (it is possible to install all versions on a single computer)? Hi Yani, Windows 7 Home Premium...

I have downloaded and installed Framework 3.5.1, but FES 2.8 still not works.
FES 2.7.2 had worked properly.
Any idea?

thanks

Thanks for Your answer. In this case I will try the proxy alignment on my bravo. If proxy is fail, I will use a time delay relay. Just as an interesting thing: If I turn the key to MAR, but not to start engine, and after a few seconds to off then immediatly to start engine, odo isn't flashing and al...

I think that Proxy Alignement can't do with FES in Bravo. I have trouble in Bravo 07, friend has trouble in Stilo. Always you can drive to Fiat Service to do Proxi Alignment. I think it will be cost about 5 Euro with friendly mechanic... Thanks. I've read your problem. I have a lot of stilo owner f...

Hi,

I've installed a Connect Nav+ to my Bravo 2008. Of course, I have a flashing odometer. I should do a proxy alignment, just I'm afraid a little bit.
If it fails, won't make anything wrong?

Thanks

Hi, I bought the similar or same type (orange-blue label). By an other thread in this forum, ( http://forum.multiecuscan.net/viewtopic.php?f=5&t=1493 ) I found the problem. The circuit board was different, but the problem was the same. The CanH and CanL was connected to eachother by an 120ohm re...

Hi Yani,

I use this greatful software on my stilo successfully.
Is it possible to improve it for Fiat Bravo 2007 also, in the future? Maybe with Proxy Allignment functions?


Thanks

stilos

Hi,

I had the same problem. I removed the wrong resistor and installed new resistors and capacitors in accordance with posted above and wiring sheet.
It was a great help. Now my ELM interface works properly.

Thanks